Fuel Saving Devices (RIZOR MAXIMIZER)

November 19th, 2015 Leave a comment Go to comments


THE BEST FUEL SAVER IN THE WORLD

ADVANCE ENERGY, FUEL SAVER and filters that have been PROVEN and TESTED ALWAYS


“The only means of enhancing power and efficiency of diesel and gasoline injection is always through testing before being bought”

 

1.Maximizer 2A (Max2A)
Backpressure on the engine is the loss of diesel and gasoline to be one cause imperfect combustion engine so that the power generated was not optimal. MAXIMIZER 2A was created to address the issue on diesel / petrol non-turbo that can eliminate backpressure and increases engine power, without sacrificing fuel efficiency. Fuel consumption becomes more efficient, if the ‘driving style’ remains as it was before the installation.

Maximizer 2A

Maximizer 2A

 

2. Maximizer 2B (Max2B)
On air turbo engine, in addition to problems backpressure on the engine, there are also other losses, namely “Turbo Lag” is the activation lag turbo system on those machines that have a direct impact on the acceleration. Engine feels there are obstacles before the turbo starts to work.

2B MAXIMIZER created to overcome backpressure on turbo diesel / petrol turbo which significantly influence the increase in engine power, as well as narrowing the “Turbo Lag” or lag turbo system activation which turned out to be a great influence on the acceleration or the “pull” of the machine. Since the initial acceleration increases, the fuel consumption becomes more efficient, if the ‘driving style’ remains as it was before the installation.

Maximizer 2B

Maximizer 2B

 

Here is a schematic drawing installation MAXIMIZER 2B :

 

fixing-scheme-maximizer-2b-tool-fuel-saver-best-in-the-world

 

3. Rizor Fuel Power (RFP)
Application RIZOR MAXIMIZER diesel engine aimed at gaining a better engine performance, alleviate the engine that has direct impact to the efficiency of fuel use. This brings new requirements will improve the flow of fuel in principle on the machine so that the presence RIZOR FUEL POWER (RFP) is aligning and perfecter of fuel flow that directly affect the whole system RIZOR.

Rizor Fuel Power, is used in diesel engines turbo and non-turbo diesel, serves to add fuel power with emphasis on the performance of 50% and 50% for efficiency (saving) of fuel.

Of installation we’ve ever done for this product Rizor Power Fuel, fuel efficiency (diesel) can be reached 197.55% (AB 1026 Holden Gemini AX). For the application on diesel personal vehicles (turbo and non-turbo) under 5000 cc.

Rizor Fuel Power

Rizor Fuel Power

 

Here is a schematic drawing installation RIZOR FUEL POWER (RFP) :

 

fixing-scheme-rizor-fuel-power-(rfp)-tool-fuel-saver-best-in-the-world

 

4. Rizor Fuel Efficiency Maximizer (RFEM)
Used on heavy equipment or vehicle that serves to improve the flow of fuel to fuel efficiency and increased power. RFEM made according to the condition of the vehicle (tailor made). RFEM system consists of MAX1 and unit Fuel Pressure Control Chamber.

RFEM Types :
1. RFEM I for buses and trucks powered 50-200 hp
2. RFEM II for buses and trucks 201-400 hp
3. RFEM III for buses and trucks powered> 400 hp
4. RFEM for heavy equipment and other diesel engines

Here is a schematic drawing installation Rizor Fuel Efficiency Maximizer (RFEM) :

RFEM

RFEM

 

5. RIZOR Economic Power System (REPS)
Used on large capacity diesel engines (up to 400 hp/300 kW), which is determined by:
• KW / hp engine
• Liter use for Boiler / Dryer
This tool really is custom made and tailored.

TYPE REPS:
1. The efficiency of fuel use HSD
2. Fuel efficiency by converting to the MFO HSD without using heaters

The following are photos of engines that use diesel saving devices RIZOR Economic Power System (REPS) :

 

REPS

REPS

 

6. Rizor Fuel Filter (RFF)
Is a screening tool gasoline and diesel fuel (universal) free flow designed specifically to increase the supply of fuel to the combustion chamber for the combustion process. Fuel efficiency is maintained, because the current supply will affect the reduction in ‘power’ needed to ‘pull’ the fuel from the tank.

Rizor Fuel Filter, has a unique filtration system, the inlet is at the bottom of the filter, while the outlet is on the top of the filter. Naturally, all the dirt and water with the effects of gravity will settle on the bottom of the filter, and a nice escape from the deposition, are filtered by the filter element.

Filter element is made of stainless steel double layer so it can be washed, does not require a new replacement and can last a lifetime in your vehicle. Effective and efficient. Special design one bolt (just needed a key 17) to open the whole components of RFF facilitate users in the process of routine cleaning.

Here is a universal fuel filter tool technology :

RFF

RFF

 

7. Rizor Air Filter (RAF)
Air filter is a device for diesel engine specifically designed and customized to increase the air supply to the combustion chamber for the combustion process. This filter is made of stainless steel so it can be washed and does not require a new replacement.

Here is a tool Rizor Air Filter (RAF) :

RAF

RAF

 

Next is how to install TOOL FUEL SAVER (RIZOR MAXIMIZER) :

Installation tool Rizor done outside the machine without taking any action against the engine. Rizor Installation only takes approximately 3 hours, except REPS with the following steps:

1. The test vehicle prior to installation.

a. Efficiency test is done using a 1 liter measuring tube with a constant speed of 80 km / h.
b. Performance Test Performed by the method of recording the travel time from 0-100 km / h.
c. Top RPM Test Done Top RPM record.

2. Installation RIZOR.

3. The test vehicle after installation.

a. Efficiency test is done using a 1 liter measuring tube with a constant speed of 80 km / h.
b. Performance Test Performed by the method of recording the travel time from 0-100 km / h.
c. Top RPM Test Done Top RPM record.

The entire installation process takes only Rizor approximately 3 hours, except for REPS. The installation process has to go through the testing process before and after the installation to avoid differentiating RIZOR MAXIMIZER with other products so as to give more confidence for you to use RIZOR MAXIMIZER.

As for cars already on FUEL SAVER DEVICE (RIZOR MAXIMIZER), the following we will show pictures of the car one of our customers already use, and proven results :

Panther

Panther

Rizor 1

Rizor 1

Rizor 2

Rizor 2

 

The next step if you want to place an order, offer or percentage, the data must be provided prior to booking, offers or presentation, namely :

1. The data engine (Engine Specification), including engine power in kW / HP / PS.
2. Pictures fuel line installation
3. Pictures injection pump engine
4. Picture the fuel injector (nozzle)
5. Real fuel consumption data per hour over the last year (the original) and will be refunded after the party copied RIZOR.
6. Production data KWH machine every hour for the past year (the original), copied by the party returned after RIZOR

SURVEY
• Performed to determine the manufacture and placement tools RIZOR and determine the appropriate measuring tool
• The cost of the survey based on location, paid in advance before the survey begins
• Cost is determined after a survey measuring instruments

ORDER CONTRACT AND REPS :
1. Payments made in advance entirety before making equipment
2. This is necessary, because the equipment REPS highly customized according to the conditions and the amount of engine
3. Cost measurement tool used prepaid
4. Tax paid by the customer
5. REPS time of maximum 45 days for a machine with a capacity above 300 KW

Price does not include :
1. Cost presentation (based on location)
2. Cost survey (based on location)
3. Tax (VAT) (a provision of the state)
4. Cost efficiency measure (corresponding machine)
5. Installation costs (depending on location)

 

 

For more information contact us at :

Email : aries_pdn@yahoo.com

 
Check out my other information on :

  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.